Bell & Gossett 2.5BB Series e-1531 Pump 7.5HP Motor comes with 60-day Free Returns and the most competitive prices on genuine delivered to your door.
Bell & Gossett Floor Mounted Pump Series e-1531, Model 2.5BB Iron Body Pump, SS Impeller,?7.5 HP 1750/208-230/460/3/60 213JM Premium Efficient?TEFC?motor, EPR/SiC/SiC/SS Seal.?ANSI 3? suction, 2-1/2? discharge companion flanges and gaskets supplied by others.?We provide WEG and Baldor Electric motors that meet current EPACT NEMA Premium efficiency electrical standards.?You will need to specify your exact GPM, Ft TDH design condition and motor electrical operating voltage requirements at time of order. The Series e-1531 is available in 15 sizes and a variety of configuration options that enables customization and flexibility to fit a broad range of operating conditions.The Bell & Gossett Series e-1531 is?an end suction, close-coupled, footless pump available in 1.25? through 6? discharge. Motor size 3/4 to 50 HP at 1750 RPM, 2 to 60 HP at 3500 RPM. Stainless steel construction with flows to 2300 GPM, heads to 400 feet.?Close-coupled, space-saving economy plus rugged construction make the Series e-1531 the ideal selection for a variety of applications. Available with the B&G standard self-flushing Carbon/Ceramic mechanical seals in 175# working pressure design.The new Bell & Gossett Series e-1531 space-saving, close-coupled, end suction pump with footless volute has been designed to offer the highest overall efficiencies in the market for HVAC and plumbing applications. With the largest ?Efficiency Island? compared to other similar pumps, the e-1531 reduces electricity consumption, improves overall system performance and lowers life cycle costs. This new and extensive product line enables users to maintain significantly higher levels of efficiency over a much wider range of operating conditions. The Series e-1531?s exceptional performance is the result of cutting edge computational fluid dynamics (CFD) design technology, deep hydraulic engineering expertise, and Xylem?s comprehensive knowledge of HVAC and plumbing applications.
|
Manufacturer:
|
Bell & Gossett
|
|
Series:
|
e-1531
|
|
Model:
|
2.5BB
|
|
Working Pressure:
|
175 PSI
|
|
Construction:
|
Cast Iron
|
|
Pump Type:
|
Centrifugal
|
|
Mounting Type:
|
Base Mounted
|
|
Frame Size:
|
213JM
|
|
Horsepower:
|
7.5 HP
|
|
Motor RPM:
|
1750/208-230/460/3/60
|
|
Motor Phase:
|
Three Phase
|
|
Hertz:
|
60
|
|
Max Temp:
|
225*F
|
| brands | Bell & Gossett |
|---|
| Settings | Bell & Gossett 2.5BB Series e-1531 Pump 7.5HP Motor remove | HOFFMAN 160011 Watchman WCS-8-20B Condensate Pump remove | Bell & Gossett 1EF043LF Be604T Bronze Series e-60 Pump 1/4 HP remove | Bell & Gossett 172672LF 618T Series 60 Pump 2 HP Motor remove | ARMSTRONG 116475-742 H-64-1 Cast Iron Pump 3/4HP 1PH ECM Motor remove | TACO 1638E 1600 Series Cast Iron Centrifugal Pump 2HP 1PH remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Bell & Gossett 2.5BB Series e-1531 Pump 7.5HP Motor remove | HOFFMAN 160011 Watchman WCS-8-20B Condensate Pump remove | Bell & Gossett 1EF043LF Be604T Bronze Series e-60 Pump 1/4 HP remove | Bell & Gossett 172672LF 618T Series 60 Pump 2 HP Motor remove | ARMSTRONG 116475-742 H-64-1 Cast Iron Pump 3/4HP 1PH ECM Motor remove | TACO 1638E 1600 Series Cast Iron Centrifugal Pump 2HP 1PH remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | 2.5BB | 160011 | 1EF043LF | 172672LF | 116475-742 | 1638E3E31638012 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price | $5,655.00 | $1,924.00 | $1,930.00 | $1,956.00 | $1,917.00 | $1,917.00 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | Bell & Gossett 2.5BB Series e-1531 Pump 7.5HP Motor comes with 60-day Free Returns and the most competitive prices on genuine delivered to your door. | HOFFMAN 160011 Watchman WCS-8-20B Condensate Pump comes with 60-day Free Returns and the most competitive prices on genuine delivered to your door. | Bell & Gossett 1EF043LF Be604T Bronze Series e-60 Pump 1/4 HP comes with 60-day Free Returns and the most competitive prices on genuine delivered to your door. | Bell & Gossett 172672LF 618T Series 60 Pump 2 HP Motor comes with 60-day Free Returns and the most competitive prices on genuine delivered to your door. | ARMSTRONG 116475-742 H-64-1 Cast Iron Pump 3/4HP 1PH ECM Motor comes with 60-day Free Returns and the most competitive prices on genuine delivered to your door. | TACO 1638E 1600 Series Cast Iron Centrifugal Pump 2HP 1PH comes with 60-day Free Returns and the most competitive prices on genuine delivered to your door. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Content | Bell & Gossett Floor Mounted Pump Series e-1531, Model 2.5BB Iron Body Pump, SS Impeller,?7.5 HP 1750/208-230/460/3/60 213JM Premium Efficient?TEFC?motor, EPR/SiC/SiC/SS Seal.?ANSI 3? suction, 2-1/2? discharge companion flanges and gaskets supplied by others.?We provide WEG and Baldor Electric motors that meet current EPACT NEMA Premium efficiency electrical standards.?You will need to specify your exact GPM, Ft TDH design condition and motor electrical operating voltage requirements at time of order. The Series e-1531 is available in 15 sizes and a variety of configuration options that enables customization and flexibility to fit a broad range of operating conditions.The Bell & Gossett Series e-1531 is?an end suction, close-coupled, footless pump available in 1.25? through 6? discharge. Motor size 3/4 to 50 HP at 1750 RPM, 2 to 60 HP at 3500 RPM. Stainless steel construction with flows to 2300 GPM, heads to 400 feet.?Close-coupled, space-saving economy plus rugged construction make the Series e-1531 the ideal selection for a variety of applications. Available with the B&G standard self-flushing Carbon/Ceramic mechanical seals in 175# working pressure design.The new Bell & Gossett Series e-1531 space-saving, close-coupled, end suction pump with footless volute has been designed to offer the highest overall efficiencies in the market for HVAC and plumbing applications. With the largest ?Efficiency Island? compared to other similar pumps, the e-1531 reduces electricity consumption, improves overall system performance and lowers life cycle costs. This new and extensive product line enables users to maintain significantly higher levels of efficiency over a much wider range of operating conditions. The Series e-1531?s exceptional performance is the result of cutting edge computational fluid dynamics (CFD) design technology, deep hydraulic engineering expertise, and Xylem?s comprehensive knowledge of HVAC and plumbing applications.
| 160011 Hoffman Watchman WCS-8-20B Steam Condensate Pump. The WCS-8-20B has a 3/4" connection and a 1/3 HP, 3450 RPM, 115v single phase motor. The WCS-80-20B is a simplex unit, with a 9 gallon tank, capable of pumping 12 gallons per minute at 20 psi and 8,000 EDR.The Hoffman condensate pump units feature cast iron receivers that are warranted for 20 years from date of shipment against failure due to corrosion. They are supplied in 6, 9, 14 and 23 gallon receiver sizes with low inlet heights for ease of installation.Hoffman Watchman pumps are the reliable and proven design Watchman Close Coupled Centrifugal Pumps with bronze impeller, bronze wearing ring, carbon/ceramic/mechanical seal rated to 250 degree, and cast iron housing. Motors are vertically mounted drip proof ball bearing design with built in overload protection and stainless steel shafts. Pumps are controlled by heavy duty, double pole, externally adjustable float switches. Duplex units are provided with mechanical alternators as standard for two pump control. Units are normally stocked. | 1EF043LF Bell & Gossett Be604T Bronze Series e-60 Pump 1/4 HP, Three Phase 208-230/460v Motor, All Bronze?Construction, Pump Size 1.25x1.25x5.25 with a 4.375" Impeller Diameter.?The Bell & Gossett Series e-60 is a three-piece centrifugal in-line pump designed for HVAC, potable water, and other clean water applications in the residential and commercial markets. Series e-60 offers great value with class-leading hydraulic efficiency, long pump life, and easy serviceability. Quiet operation, a robust mechanical seal, and maintenance-free bearings make Series e-60 a truly worry-free, install-and-forget solution.Ease of Selection:?Series e-60 pumps come in 9 sizes, with 144 available stock models and many more Built-to-Order configurations. Both stock and BTO pumps are easily selectable using B&G pump selection and e-order software.Simple, Versatile Installation:?The Series e-60 mounts directly to system piping by its bolted flange connections, offering design flexibility and saving valuable floor space. As a replacement pump, the Series e-60 is a perfect drop-in solution, as flange- to-flange and intake/suction dimensions are identical to equivalent legacy Series 60 models ? and even some competitors? pumps.Robust Design:?The Series e-60 employs high quality components for smooth performance and long pump life. The pumps permanently lubricated rotating bearings come fully enclosed in Polyrex grease for true maintenance-free operation. The unitized mechanical seal offers better performance and longer life.Ease of Service:?Three-piece design allows for minimally invasive service. The motor, coupler, seal and impeller can all be repaired or replaced without removing the pump from its?piping. The one-piece seal simplifies seal replacement, eliminating the clumsy task of assembling difficult seal components to the shaft.Series e-60 ECM:? Variable Speeds from 300-1725 RPM? On-board dial for manual speed control? 0-10V DC signal input for automatic control? Quieter operation than standard induction motors ? ECM up to 82% efficient at constant speed
| BELL & GOSSETT 172672LF Bell & Gossett 618T Series 60 Pump 2 HP Motor172672LF Bell & Gossett Series 60 Pump 618T 2 HP Motor 208-230/460v with three-piece cast iron body booster pump for hydronic heating and cooling in commercial applications. Bell & Gossett Series 60 618T, 172672??inline circulating maintenance-free in-line pump is available in pipe sizes from 1? to 3? and motor sizes from 1/4 to 3 HP at 1750 RPM. Available in bronze-fitted and all-bronze construction. Flows to 200 GPM and heads to 55 feet. The new Bell & Gossett Series 60 replaced the old Series 60 in 1999. The new Series 60 pumps incorporate Bell & Gossett's time-tested three-piece construction (motor, bearing assembly, volute), along with numerous technological advances. A precision crafted, permanently lubricated bearing assembly ensures long life and quiet operation. | 116475-742 Armstrong H-64-1 Cast Iron Pump 3/4HP 1PH ECM Motor.Armstrong In-Line Circulators are apart of the Series H. The 116475-742 Armstrong H-64-1 Cast Iron Pump 3/4HP 1PH ECM Motor?is suitable for hydronic heating and cooling, domestic water systems, multi-stage zoning and general industrial service applications. Built using a standard three-piece design that features a radially-split body, oversized shaft, centrifugal impeller, positive mechanical seal and modular construction, Armstrong Pumps Series H Circulators are a trusted, durable product that have been used by HVAC professionals for decades.Features:
| Taco 1638E 1PH 2HP 1600 Series In-Line Centrifugal Pump, Cast Iron Casing,?2 HP, 1750 RPM, 115/230v, single phase motor. Flanges are included in 2". Comes Standard With?Stainless Steel Impeller. **Please note this pump is too heavy for UPS and will ship regular ground freight.Taco 1600 Series In-Line Pumps feature a replaceable, permanently-lubricated bearing cartridge. The exclusive 1600 cool-bearing cartridge design isolates the bearing from the effects of system temperatures to greatly extend bearing life. A standard bearing design also means that a single bearing cartridge can be used to service the entire line, making servicing a snap. Taco 1600 Series pumps are available in 15 models ranging in performance capacity from 10 GPM to 235 GPM with head capacities up to 68 ft.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
Madilynn Hooper (verified owner) –
Brynn Ewing (verified owner) –
Jordyn Hooper (verified owner) –
Daisy Kirby (verified owner) –
Cierra Macias (verified owner) –