| Content | Taco FI Series Pumps provide quiet, dependable power plus hydraulic performance and dimensional characteristics that meet the very latest standards. The improved bearing frame design features sealed-for-life bearings that meet all industry requirements for a minimum L 10 life of 60,000 hours, and optional, re-grease able bearings are also available. An easy-to-replace, slip-on shaft sleeve facilitates seal maintenance in the field and lowers maintenance costs. Taco?s exclusive dry shaft design protects the pump shaft by eliminating contact with the circulating fluid, so corrosion-resistant shaft materials are generally not required. FI Pumps also feature flush seal line taps, allowing the installation of a filter to protect the seal from non-condensable particles present in open systems. In addition, pressure tappings on suction and discharge connections are provided as a standard feature. Taco FI Pumps are ideally suited for a variety of applications, including heating, air conditioning, pressure boosting, cooling water transfer, and water supply. | BELL & GOSSETT 172672LF Bell & Gossett 618T Series 60 Pump 2 HP Motor172672LF Bell & Gossett Series 60 Pump 618T 2 HP Motor 208-230/460v with three-piece cast iron body booster pump for hydronic heating and cooling in commercial applications. Bell & Gossett Series 60 618T, 172672??inline circulating maintenance-free in-line pump is available in pipe sizes from 1? to 3? and motor sizes from 1/4 to 3 HP at 1750 RPM. Available in bronze-fitted and all-bronze construction. Flows to 200 GPM and heads to 55 feet. The new Bell & Gossett Series 60 replaced the old Series 60 in 1999. The new Series 60 pumps incorporate Bell & Gossett's time-tested three-piece construction (motor, bearing assembly, volute), along with numerous technological advances. A precision crafted, permanently lubricated bearing assembly ensures long life and quiet operation. | 160011 Hoffman Watchman WCS-8-20B Steam Condensate Pump. The WCS-8-20B has a 3/4" connection and a 1/3 HP, 3450 RPM, 115v single phase motor. The WCS-80-20B is a simplex unit, with a 9 gallon tank, capable of pumping 12 gallons per minute at 20 psi and 8,000 EDR.The Hoffman condensate pump units feature cast iron receivers that are warranted for 20 years from date of shipment against failure due to corrosion. They are supplied in 6, 9, 14 and 23 gallon receiver sizes with low inlet heights for ease of installation.Hoffman Watchman pumps are the reliable and proven design Watchman Close Coupled Centrifugal Pumps with bronze impeller, bronze wearing ring, carbon/ceramic/mechanical seal rated to 250 degree, and cast iron housing. Motors are vertically mounted drip proof ball bearing design with built in overload protection and stainless steel shafts. Pumps are controlled by heavy duty, double pole, externally adjustable float switches. Duplex units are provided with mechanical alternators as standard for two pump control. Units are normally stocked. | BELL & GOSSETT 105102 Bell & Gossett PD37T BI with 3/4 HP Motor105102 Bell & Gossett PD37T BI with 3/4 HP Motor.?The?Bell & Gossett Series PD three-piece cast iron body booster pump for hydronic heating and cooling in closed loop systems. The Model PD37T BI is oil lubricated with a 3/4 HP three phase motor. Includes pair of 3" flanges.?For applications requiring higher flow and head pressures, Bell & Gossett provides an entire range of booster pumps. The designs of these pumps are based on three-part configuration which offers complete field repairability and compact construction. All Bell & Gossett boosters are equipped with the incomparable B&G manufactured motor for quiet and efficient operation.?*Please note this pump has to ship LTL freight., it's too heavy for UPS. | 1EF043LF Bell & Gossett Be604T Bronze Series e-60 Pump 1/4 HP, Three Phase 208-230/460v Motor, All Bronze?Construction, Pump Size 1.25x1.25x5.25 with a 4.375" Impeller Diameter.?The Bell & Gossett Series e-60 is a three-piece centrifugal in-line pump designed for HVAC, potable water, and other clean water applications in the residential and commercial markets. Series e-60 offers great value with class-leading hydraulic efficiency, long pump life, and easy serviceability. Quiet operation, a robust mechanical seal, and maintenance-free bearings make Series e-60 a truly worry-free, install-and-forget solution.Ease of Selection:?Series e-60 pumps come in 9 sizes, with 144 available stock models and many more Built-to-Order configurations. Both stock and BTO pumps are easily selectable using B&G pump selection and e-order software.Simple, Versatile Installation:?The Series e-60 mounts directly to system piping by its bolted flange connections, offering design flexibility and saving valuable floor space. As a replacement pump, the Series e-60 is a perfect drop-in solution, as flange- to-flange and intake/suction dimensions are identical to equivalent legacy Series 60 models ? and even some competitors? pumps.Robust Design:?The Series e-60 employs high quality components for smooth performance and long pump life. The pumps permanently lubricated rotating bearings come fully enclosed in Polyrex grease for true maintenance-free operation. The unitized mechanical seal offers better performance and longer life.Ease of Service:?Three-piece design allows for minimally invasive service. The motor, coupler, seal and impeller can all be repaired or replaced without removing the pump from its?piping. The one-piece seal simplifies seal replacement, eliminating the clumsy task of assembling difficult seal components to the shaft.Series e-60 ECM:? Variable Speeds from 300-1725 RPM? On-board dial for manual speed control? 0-10V DC signal input for automatic control? Quieter operation than standard induction motors ? ECM up to 82% efficient at constant speedMANUFACTURER: | Bell & Gossett | SERIES: | e-60 | MODEL: | Be604T | PART NUMBER: | 1EF043LF | PUMP SIZE: | 1.25 x 1.25 x 5.25 | IMPELLER DIAMETER (IN): | 4.375 | MOTOR HP: | 1/4 ODP | RPM: | 1750 | PHASE: | Three Phase 208-230/460v Motor | WORKING PRESSURE: | 175 PSI Max | CONTSTRUCTION: | All Bronze | CONNECTION SIZE: | 1.25" |
| 168325LF Bell & Gossett e3515T Series e-1535 Pump 3HP, 3450 RPM three phase 208-230/460 volt pump designed for heavy duty requirements in cooling tower, refrigeration, industrial and general service applications. This back-pullout pump offers ease of service in a close-coupled design. This low maintenance pump can be mounted vertically or horizontally to provide maximum flexibility. Ball bearing design and standard internally flushed mechanical seal provide long, dependable service. Foot-mounted, end-suction, close-coupled pump available in 3/4? through 1-1/2? sizes. Motor sizes 1/4 to 5 HP. Available in bronze-fitted and all bronze construction with flows to 240 GPM at 115 feet. Offered in 29 Stock part numbers as well as configurations thru e-1535 BTO.MANUFACTURER: | Bell & Gossett | SERIES: | e-1535 | PART NUMBER: | 168325LF | MODEL: | e3515T | CONNECTION SIZE: | Suction: 2, Discharge: 1-1/2 | CONSTRUCTION: | Cast Iron Bronze Fitted | PUMP TYPE: | Centrifugal | MOUNTING TYPE: | Foot Mounted Vertically or Horizontally | HORSEPOWER: | 3 HP | MOTOR RPM: | 3450 RPM | MOTOR PHASE: | Three Phase | VOLTAGE: | 208-230/460 | MAX WORKING TEMPERATURE: | 250*F | WORKING PRESSURE: | 175 psi (12 bar) | CYCLE: | 60 |
|
Mariela Wilcox (verified owner) –
Esmeralda Mills (verified owner) –
Nikky Engelen (verified owner) –
Sterling Cordova (verified owner) –
Daniela Li (verified owner) –
Maximilian Whitehead (verified owner) –